Miller Electric SW3 사용자 설명서
3
Tongs and Tips
(Must be ordered separately from spot welders. One pair of tips are supplied with each set of tongs.)
STANDARD 90°
No. 1 Morse Taper
No. 2 Morse Taper
#040 218
—
#040 219
—
#040 220
#041 001
6 in
(150 mm)
12 in
(304 mm)
18 in
(457 mm)
TONG LENGTH
TONGS
6-1/4 in
(159 mm)
4-1/4 in
(108 mm)
7-1/2 in
(190 mm)
9 in
(229 mm)
X
#040 223
#040 308
STANDARD 45°
No. 1 Morse Taper
No. 2 Morse Taper
—
—
#041 004
—
#041 005
#040 296
#040 851
#040 225
TT-6W
No. 2 Morse Taper
TT-9W
No. 2 Morse Taper
—
—
#041 838
#040 308
—
—
#041 840
#040 308
TIPS INCLUDED
4-1/4 in
(108 mm)
6-1/4 in
(159 mm)
X
Notes for tongs and tips:
Tongs and tips shown to the
left can be used with all PSW
and SSW model spot welders.
Recommended max. tong
length is 18 in (457 mm).
left can be used with all PSW
and SSW model spot welders.
Recommended max. tong
length is 18 in (457 mm).
Tong throat-height dimen sion
for standard 90° and 45° tongs
is 4-1/4 in (108 mm). Throat
length is measured from the
center of the spot tips to the
front water hose connection.
X = tong length.
for standard 90° and 45° tongs
is 4-1/4 in (108 mm). Throat
length is measured from the
center of the spot tips to the
front water hose connection.
X = tong length.
One set of tips is supplied with
each set of tongs.
each set of tongs.
Tips are made of RWMA Class
2 alloy.
2 alloy.
Maximum welding capabilities
are obtained with minimum
tong length.
are obtained with minimum
tong length.
MT = Morse Taper.
No. 1 Morse Taper has smaller
diameter than No. 2 Morse
Taper.
diameter than No. 2 Morse
Taper.
#040 227
#040 223
No. 1 MT (Pointed)
#040 224
No. 1 MT (Offset)
#040 851
No. 1 MT (Offset)
#040 226
No. 1 MT (Offset)
#040 298
No. 1 MT (Offset)
#040 308
No. 2 MT (Pointed)
#040 225
No. 2 MT (Offset)
#040 216
No. 1 MT (Flat Swivel Tip)
Matching Pointed Tip
Adapter (adapts No. 1 Morse Taper Tip
to No. 2 receptacle)
2 tips
2 tips
2 tips
2 adapters
2 tips
2 tips
2 tips
2 tips
2 tips
QUANTITY
TIPS
Standard No. 1 Tongs, 90°
Standard No. 1 Tongs, 90°
Standard No. 1 Tongs, 45°
Standard No. 2 Tongs, 45°
Standard No. 1 Tongs, 90°
Standard No. 1 Tongs, 90°
Standard No. 1 Tongs, 90°
Standard No. 2 Tongs, 90°
TT-6W Tongs
TT-9W Tongs
TT-9W Tongs
Standard No. 2 Tongs, 90°
TT-6W Tongs (top)
TT-9W Tongs (top)
TT-9W Tongs (top)
WHERE USED