Unitech RS700 사용자 설명서
Chapter 3
Making RFID Applications
16
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Creating a New EC Spec
In the All Defined EC Specs field, *specTest1 is defined and subscribed as the
default. Create a new event cycle specification through the following:
In the All Defined EC Specs field, *specTest1 is defined and subscribed as the
default. Create a new event cycle specification through the following:
1. Click New EC Spec. An InputBox screen appears.
2. Input a unique EC Spec name or accept the default at spec1. Click OK, and
spec1 appears in the All Defined EC Specs field.
3. In the All Defined EC Specs: field, check Repeat, Period: for the automatic
reading mode, and set the following values in milliseconds.
– Repeat, Period: field - Cycle time (5000ms by default).
– Duration: field - Duration for reading data within the cycle time (4500ms by
– Repeat, Period: field - Cycle time (5000ms by default).
– Duration: field - Duration for reading data within the cycle time (4500ms by
default).