Mitsubishi Electronics 60/60S 사용자 설명서
6. Data In/Out
I-223
6. Data In/Out
When the function selection key
DIAGN
IN/OUT
is pressed, the following menu is displayed:
Diagnosis menu (No.5 to 8)
Diagnosis menu (No.1 to 4)
Diagnosis menu (No.9 to 10)
Input/output menu (No.5), Program sever menu (No.1 to 3)
Input/output menu (No.1 to 4)
ABS-SRV
ADJUST
HISTORY
CONFIG
MENU
ALARM
SERVO
SPINDLE
PLC-I/F
MENU
AUX-PRM
AUX-MON
MENU
COPY HOSTSET
HOST IC
CARD MENU
INPUT OUTPUT
ERASE FILE MENU
Menu selection keys
Previous page key
Next page key
Input/output menu
No.1 to 4
No.1 to 4
PREVIOUS
PAGE
NEXT
PAGE
PAGE
DATA
INPUT
1:IN 2:COMP
DATA
OUTPUT
PROGRAM
ERASE
(Note) Use
I/O PARA
of
TOOL
PARAM
to define the data input/output parameter.
Input/output menu
No.5
No.5
PROGRAM
COPY
COPY
CONDENSE
CONDENSE
Diagnosis menu
Refer to the section on diagnosis.
Program server menu
Refer to the section on program server.
MENU
MENU
MENU
PROGRAM
FILE
PROGRAM
FILE
(Note) When connected to MELSEC GPPQ/GPPW or GOT, the RS-232C communication port is used
constantly, so the input/output device cannot be used.
Thus, if input/output operations are attempted when the parameters are set to MELSEC GPPQ/
GPPW or GOT connection, the "E60 IOP ERR-2" error will occur.
Thus, if input/output operations are attempted when the parameters are set to MELSEC GPPQ/
GPPW or GOT connection, the "E60 IOP ERR-2" error will occur.