ADIC 601356 사용자 설명서

2-114

Command Reference

601356 Rev A

Moves media from one library to another.

A client uses the 

vsmove

 command to direct the movement of 

media from one library to another. Inter-library media 
movement requires operator intervention. The operator must 
eject the media from their current libraries and enter them into 
the target library. The Eject and Enter functionalities are 
available from the appropriate library’s console display. The 
Eject and Enter functionalities are not available from the 
command line.

Upon receipt of a 

vsmove

 request, the VolServ software verifies 

the specified media exist, the target library supports the media 
type of the specified media, and there exists an appropriate 
library MediaClass association with the target library. The 
current library of each specified media is commanded to eject 
the media. An Eject request, specifying the target library, is 
displayed on the library console of each losing library. The 
operator must select and manually eject or remove the media on 
the list. After media is selected for ejection, the target library 
displays a corresponding Enter request for that media. The 
operator must then manually enter the media specified on the 
list into the target library.

When the media is ejected from the original library and entered 
into the target library, the VolServ system generates unsolicited 
status messages if any of the moved media are associated with 
MediaClass groups that are configured to generate unsolicited 
communication from VolServ.

The 

vsmove

 command is run for “homeless” media. A 

homeless media is an Intransit media that has no pending 
movement activity.