Fujitsu DL7400 사용자 설명서
USING SETUP MODE
Table 5.4 HARDWRE Items and Options (Cont.)
NOTE: Underlined options are the factory defaults.
HARDWRE
Items
Options Description
<BUFFER>
(continued)
(continued)
NOTE:
• 0BYTE option is recommended only
• 0BYTE option is recommended only
for graphics application.
• With 128KB selected, the printer
cannot accept any download font data.
<INTRFCE>
S
typ
rf
co
elects the
mputer.
e of the inte ace to the
PARALEL
Centronics parallel interface
SERIAL
RS-232C serial interface
USB
USB
interface
AUTO-2S
Auto interface selection mode
AUTO-4S
AUTO-6S
AUTO-6S
• Both interfaces are ready for
muni
com
cation.
AUTO10S
•
cify t
ing regarding the selected
rface
g inactive.
AUTO15S
Spe
he tim
inte
as bein
AUTO20S
To switch the interface to the optional LAN
interface, mount the LAN card with the setup
mode set to “AUTO-XS” or “AUTOXXS”
under “INTER
interface, mount the LAN card with the setup
mode set to “AUTO-XS” or “AUTOXXS”
under “INTER
ch in turn i
“HARDWRE” The interface will
of
p mode to
“INTERFCE” under “HARDWRE,”
remove the LAN card.
remove the LAN card.
• To switch the interface to a fixed
interface, set PARALEL,USB with the
LAN card mounted, and the setup mode
set to “INTERFCE” under
“HARDWRE.”
LAN card mounted, and the setup mode
set to “INTERFCE” under
“HARDWRE.”
FCE,” whi
s under
automatically switch to the optional LAN
interface.
To switch the interface to something other
than the optional LAN interface, do either
the following:
• To return the setu
interface.
To switch the interface to something other
than the optional LAN interface, do either
the following:
• To return the setu
User's Manual
5-29