Fujitsu DL7400 사용자 설명서

3.  To secure a parallel interface cable, flip the fastener clips 

located on the printer into the notches on the cable connector. 
To secure a serial interface cable, tighten the screws in the cable 
connector. 

4.  Attach the other end of the interface cable to your computer.  

Gently pull on the cable to verify that it is secure. 

 

Before printing with your software, verify that the correct emulation is 
selected on your printer. This section describes the available emulations 
and their selection. 

The printer’s preselected factory setting is the Fujitsu DPL24C PLUS 
emulation. If this emulation is acceptable, you may skip this section. 

An emulation is a set of commands used by your software to 
communicate with the printer. There are many different emulations 
available for printers. 

Each emulation has unique features and capabilities. This printer offers 
three resident emulations: 

•  Fujitsu DPL24C PLUS (for Fujitsu DL-series printers) 
•  IBM Proprinter XL24E 
• Epson 

ESC/P2 

Resident emulations are stored in the printer’s permanent memory.  

Here are some points to help you determine which emulation to select: 

9  Determine which emulations your software supports. (Refer to 

your software documentation.) Since most software programs 
support this printer, try to run a program with the factory default 
emulation first. 
(DPL24C PLUS emulation is the factory default.) Try this 
emulation even if you are not sure of which emulation to choose. 
See Chapter 5 for detailed information about how your printer 
communicates with your software.