ID TECH ME240 사용자 설명서
41
Selections
Description
Feed
Printer will advance one label
Calibration
Printer will calibration the sensor levels, determine length and
feed label
Length
Printer determine length and feed label
No Motion
Printer will not move media
3.1.1-2.15 Label Top:
This option is used to adjust print position vertically on the label. Press the
button to move the cursor from left digit to right digit, and press the
button to set the
value from
“+” to “-” or “0” to “1/2”. Press the
button to set the value into printer.
Press
key to cancel the setting and return to the previous menu. The default
value is +000 and range is -120 to +120 dots.
3.1.1-2.16 Left Position:
This option is used to adjust print position horizontally on the label. Press the
button to move the cursor from left digit to right digit, and press the
button to set the
value from
“+” to “-” or “0” to “9”. Press the
button to set the value into printer.
Press
key to cancel the setting and return to the previous menu. The default
value is +0000 and range is -9999 to +9999 dots.
3.1.2 Sensor
Sensor
Exit
Status
Calibration
Print Setup 15/17
Media Power Up
Head Close
>
Label Top
Label Top
+000
Print Setup 16/17
Head Close
Label Top
>
Left Position
Left Position
+0000