Fujitsu FP-410 사용자 설명서

14 

(4) Place the paper in the correct orientation, and carefully close the 

top cover. 
Notes: 

1. Place the paper in the correct orientation. If the top cover is 

          closed while the paper is not correctly in place, a paper jam or 

misaligned printing might occur.   

2. To close the top cover, push the center (see arrow below) of 

          the cover until it locks securely. If the cover is locked but the 

cover open lever is pressed down, the cover is not completely 
locked. In this case, press the top cover again. If the cover is 
not completely locked, printing might be impossible. 

3. If the ERROR lamp is lit, print commands cannot be accepted. 

                    Be sure the top cover is securely locked. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
(5) Cut the leading edge of the paper by entering a cut command, etc. 

Top cover 

Cover open lever