KYOCERA 2550 사용자 설명서
Job Accounting
4-2
Job Accounting Mode
Use the job accounting mode to control the total number of copies and prints by setting an ID-code
for each account.
for each account.
The job accounting mode of this machine has the following features.
•
Controls the copier functions, printer functions, and optional scanner/fax functions using the
same ID-codes.
same ID-codes.
•
Controls up to 100 accounts.
•
You can set the ID-codes with one to eight digits.
•
Counts the number of copies for all accounts and individual accounts.
•
You can set the limit of number of sheets to up to 999,999 in 1 sheet increments.
•
You can clear the counter for all accounts and individual accounts.
Important!
For setting the limit of use in managing accounts, you must change
and
from Off to On in the default settings. If the optional network scanner kit
or fax kit is installed, set
or
in the default settings
to On. (See
.)
The following functions are available in the job accounting mode.
Notes
•
For settings on the computer required for using job accounting concerning the printer functions,
refer to the
refer to the
KX Printer Driver Operation Guide
.
•
In addition, the job accounting mode that can be set from the computer is available. For details,
refer to the
refer to the
KM-NET for Accounting Operation Guide
.
Job accounting mode
Description
Reference
page
page
Managing accounts
Registration — Registers ID-codes and limit of use. Up
to 100 ID-codes can be registered.
to 100 ID-codes can be registered.
Deletion — Deletes registered accounts.
Change of limit of use — Changes the limit of use for
each account.
each account.
All account management
Browsing of the total count, job accounting report output,
and counter clear for all accounts can be performed.
and counter clear for all accounts can be performed.
Individual account
management
management
Counting of the total count and counter clear for
individual accounts can be performed.
individual accounts can be performed.
Enabling job accounting
Turn On or Off the job accounting function.
Default settings
Adjust the default settings for the job accounting mode.