KYOCERA 2550 사용자 설명서

Copier Functions

1-11

The interrupt mode can be used to stop output of copying or another job temporarily and to output 
urgent copy or print data or received fax data. After the interrupt processing is complete, the 
interrupted job can be resumed.

The following modes are available for the interrupt function.

Press the Interrupt key. Interrupt mode OK 
[Interrupt mode] is displayed.

Store the originals for the current copying.

Set the original for interrupt copying and perform copying.

After the interrupt copying is complete, press the Interrupt key. The settings for the interrupted job 
are restored.

Replace the original with the originals that have been stored. Press the Start key to resume 
copying.

Press the Interrupt key during output. Select Interrupt mode is displayed.

If the machine has neither print data nor received fax data, Interrupt mode OK [Interrupt 
mode

] is displayed. Proceed to step 4.

Press the S key or the T key to select the desired 
interrupt mode.

Interrupt copy

•

This mode can be used to stop copying and to make a copy of 
a different original at different settings. After the interrupt copy 
has been produced, the interrupted copying can be resumed at 
the same settings in effect prior to the interruption.

•

This mode can also be used to stop output of a job and to make 
a copy of another job. After the interrupt copy has been 
produced, the interrupted job is resumed.

Priority output

This mode can be used to interrupt output of a job and to output 
print data or received fax data with priority. After priority output is 
complete, the interrupted job is resumed.

Note
To use the fax functions, the optional fax kit must be installed.

Select Interrupt mode.

Interrupt copy

Priority:Printer

Priority:Fax