KYOCERA 2550 사용자 설명서

Printer Settings

2-9

Press the S key or the T key to select Quick Copy.

Press the Enter key.

Press the S key or the T key to select the user name. 
The user name is the name that has been set with the 
printer driver.

Press the Enter key.

Press the S key or the T key to select the desired job 
name. The job name is the name that has been set 
with the printer driver.

Press the Enter key. 

Use the numeric keys to input the number of copies.

Press the Enter key. Printing starts.

Jobs stored with the quick copy/proof-and-hold are deleted automatically when the power of this 
machine is turned off. Each job, however, can be deleted manually as shown below.

Select the job to delete referring to steps 1 to 7 of 

.

Press the S key or the T key to select Delete.

Press the Enter key.

In private printing, you can execute printing by using the operation panel to input the four-digit 
access code that has been set with the printer driver when printing from your computer. The data is 
cleared after printing is complete.

In the stored job mode, access codes are not used, and print data is stored in the hard disk after 
printing is complete. For the method of setting the respective functions with the printer driver, refer 
to the 

.

Display the e-MPS screen. (See 

.)

Back

Quick Copy

e-MPS

Private/Stored

Select User Name

george

Select JOB

List

Copies

Select User Name

Delete

001

:

Copies

Select User Name

Delete

001

: