KYOCERA 2550 사용자 설명서
System Menu
3-2
Default Setting Mode
For this machine, the state that the machine enters at the end of warm-up or when the Reset key is
pressed is called initial mode. The settings of this machine that are made automatically in the initial
mode are called default settings. The default settings are divided into the
pressed is called initial mode. The settings of this machine that are made automatically in the initial
mode are called default settings. The default settings are divided into the
and the
. These settings can be changed freely according to the method
of use.
Copier Default Settings
You can set the following items as copier default settings.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
How to Display the Copy Default Screen
Use the following procedure to display the Copy Default screen.
1
Press the System Menu/Counter key.
2
Press the S key or the T key to select Copy
default
default
.
3
Press the Enter key.
4
Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1600 for the 16 ppm model,
2000
management code. The management code at the
factory default setting is 1600 for the 16 ppm model,
2000
for the 20 ppm model, and 2500 for the 25 ppm
model.
Print Report
Job Accounting
System Menu / Counter:
Copy default
Enter pin code using # key.