Hitachi N9120 사용자 설명서
Place the original face down on the scanner glass, as indicated by the reference mark.
NOTE: In the scanning software, choose the layout setting that matches the
orientation of the original on the scanner glass.
orientation of the original on the scanner glass.
How to scan
The basic steps for scanning are:
1. Load the originals.
2. Do one of the following:
1. Load the originals.
2. Do one of the following:
•
Press the Scan (
) button on the scanner front panel to start scanning with the
assigned software (and profile, if appropriate).
•
On the computer, open the scanning software, and then select the ISIS or TWAIN
data source. Select the appropriate settings, and then initiate a scan.
data source. Select the appropriate settings, and then initiate a scan.
TIP: To reduce paper jams, use scan settings that specify the actual dimensions
of the pages that you are scanning.
of the pages that you are scanning.
TIP: If you select duplex scanning or copying and you load the originals into the
automatic document feeder (ADF), the scanner processes both sides of a two-
sided original at the same time.
automatic document feeder (ADF), the scanner processes both sides of a two-
sided original at the same time.
Chapter 1
10
Use the scanner