Ricoh SP C252SF 사용자 설명서
Configuring Network Settings
This section describes configuring the settings required to use the machine on a network.
Configuring the IP Address Settings
The procedure for configuring network settings differs depending on whether the IP address is assigned
automatically by the network (DHCP), is specified manually.
automatically by the network (DHCP), is specified manually.
• The password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• If your network environment requires a specific transmission speed that is not automatically
• If your network environment requires a specific transmission speed that is not automatically
detected, specify the transmission speed in [Set Ethernet Speed] under [Network Settings].
• First configure the IP address setting, then install the driver. For details about installing the driver,
see the Driver Installation Guide.
Specifying settings to receive an IPv4 address automatically
• A DHCP server is required on the network for the machine to receive an IPv4 address
automatically.
1.
Turn on the machine.
2.
Press the [User Tools] key.
DAC509
3.
Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
4.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
5.
Press the [ ] or [ ] key to select [IPv4 Configuration], and then press the [OK] key.
1. Getting Started
42