Muratec MFX-C3035 사용자 설명서

Solving Other Problems

13-27

Printing from 
a USB mem-
ory device is 
not possible.

[External Memory 
Print] is set to [Dis-
able].

Press the [Utility/Counter] key, and 
then set [Admin Settings] - [External 
Memory Print] to [Enable].

The file format (file 
extension) is not one 
that can be printed.

Only files with the format (extension) 
for JPEG, TIFF, XPS or PDF can be 
printed.
Press [USB/HDD], and then, with 
[External Memory] - [File Type], select 
the type of files to be displayed.

A public user is not 
specified for user 
authentication.

Contact the administrator of this unit.

Printing 
takes too 
much time.

The machine is set to 
a slow printing mode 
(for example, thick 
stock).

It takes more time to print with special 
media. When using regular paper, 
make sure that the media type is set 
properly in the driver.

The machine is set to 
power saving mode.

It takes time for printing to start in 
power saving mode.

The job is very com-
plex.

Wait. No action needed.

A toner cartridge for a 
different region or an 
unapproved toner 
cartridge is installed 
([Incorrect toner car-
tridge]is displayed in 
the message win-
dow).

Install a correct toner cartridge 
approved for your specific machine.

If an error has been 
detected during print-
ing job transmission 
in the Copy mode, it 
takes a while to pro-
cess the error and 
resume the printing 
operation.

Wait. No action needed.

Blank pages 
are printed.

One or more of the 
toner cartridges are 
defective or empty.

Check the toner cartridges. The image 
will not print correctly or not at all, if the 
cartridges are empty.

The wrong media is 
being used.

Check that the media type.