Ricoh Type 3260 사용자 설명서
Connecting the Machine
13
1
EEEE
Turn on the computer.
Note
❒ When using Windows 95/98/
Me/2000/XP and Windows
Server 2003, a printer driver in-
stallation screen might appear
when the computer is turned
on. If this happens, click [Cancel]
on the screen. For more infor-
mation, see p.19 “Preparing the
Machine”.
Server 2003, a printer driver in-
stallation screen might appear
when the computer is turned
on. If this happens, click [Cancel]
on the screen. For more infor-
mation, see p.19 “Preparing the
Machine”.
The machine and computer are
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.19 “Preparing
the Machine”.
now connected. The printer driver
must be installed next. For infor-
mation about how to install the
printer driver, see p.19 “Preparing
the Machine”.
Connecting to the Ethernet
Interface
Interface
The network interface board supports
10 BASE-T or 100 BASE-TX connec-
tions.
10 BASE-T or 100 BASE-TX connec-
tions.
Important
❒ Before making the connection, touch
the metallic part to ground yourself.
AAAA
A core for the Ethernet cable is
supplied with this machine. The
Ethernet cable loop should be
about 12 cm (4.8 in.) (
supplied with this machine. The
Ethernet cable loop should be
about 12 cm (4.8 in.) (
A
A
A
A) from the
machine end of the cable.
BBBB
Turn off the main power switch.
Important
❒ Make sure the main power is
off. See "Turning On the Pow-
er", General Settings Guide.
er", General Settings Guide.
CCCC
Connect the Ethernet cable to the
10 BASE-T / 100 BASE-TX port.
10 BASE-T / 100 BASE-TX port.
DDDD
Turn on the main power switch.
1.
Indicator (green)
Remains green when the machine is
properly connected to the network.
properly connected to the network.
2.
Indicator (yellow)
Turns yellow when 100 BASE-TX is
operating. Turns off when 10 BASE-T
is operating.
operating. Turns off when 10 BASE-T
is operating.
AEV047S
AEV048S
ZKRH050E
VenusC1GB-Printer-F8_FM.book Page 13 Tuesday, March 29, 2005 4:51 PM