Ricoh Type 3260 사용자 설명서
Getting Started
18
1
Setting OHP transparencies
Note
❒ For colour printing, do not use
OHP transparencies that have eas-
ily melted surface.
ily melted surface.
❒ Insert OHP transparencies in the
K direction.
❒ We recommend that you use a
4000ANSI lumen or brighter over-
head projector to project OHP
transparencies.
head projector to project OHP
transparencies.
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ Paper size settings set using the
printer driver have priority over
those set using the machine's dis-
play panel.
those set using the machine's dis-
play panel.
❒ When the printer driver is not
used, make settings using the dis-
play panel.
play panel.
Reference
For printer driver settings, see the
printer driver Help.
printer driver Help.
AAAA
Press the
{{{{User Tools/Counter}}}} key
on the control panel.
BBBB
Press [System Settings].
CCCC
Press the [Tray Paper Settings] tab.
DDDD
Press [
T
T
T
TNext] to scroll through the
list.
EEEE
Press [Paper Type: Bypass Tray].
FFFF
Select [OHP] or [Translucent].
GGGG
Press [OK].
The paper type selected is dis-
played.
The paper type selected is dis-
played.
HHHH
Press the
{{{{User Tools/Counter}}}} key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.
VenusC1GB-Printer-F8_FM.book Page 18 Tuesday, March 29, 2005 4:51 PM