Sharp MX-C401 사용자 설명서
1-2
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1)
Automatic document feeder
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
sides of 2-sided originals can be automatically scanned.
☞
(page 1-34)
(2)
Front cover
Open this cover to replace a toner cartridge.
☞
Maintenance & Safety Guide
(3)
Operation panel
This is used to select functions and enter the number of
copies.
copies.
☞
(page 1-7)
(4)
Output tray (center tray)
Output is delivered to this tray.
(5)
Finisher*
This can be used to staple output.
☞
(page 1-39)
(6)
Main power switch
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
This is used to power on the machine.
When using the fax or Internet fax functions, keep this
switch in the "on" position.
☞
(page 1-14)
(7)
Handle
Pull this out and grasp it when moving the machine.
Pull this out and grasp it when moving the machine.
(8)
Bypass tray
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11" or A4, be
sure to pull out the bypass tray extension.
Use this tray to feed paper manually.
When loading paper larger than 8-1/2" x 11" or A4, be
sure to pull out the bypass tray extension.
☞
(page 1-31)
* Peripheral device.
BEFORE USING THE MACHINE
(1)
(2)
(4)
(3)
(5)
(6)
(7)
(8)
When a finisher is installed