Sharp AR-M205 사용자 설명서

On models that support automatic two-sided copying, two originals placed on the document glass can be copied 
onto each side of a single sheet of paper. In addition, an RSPF can be used to copy two originals onto one sheet of 
paper, or one two-sided original onto two sheets of paper, or one two-sided original onto each side of one sheet of 
paper. 

→ Paper

→ Two sides

5-1/2" x 8-1/2", 8-1/2" x 11", 
8-1/2" x 11"R, 8-1/2" x 14",
11" x 17" 
• The bypass tray cannot be 

used.

One-sided original 
→ Two sides

Two-sided original 
→ One side

Two-sided original 
→ Two sides

8-1/2" x 11", 8-1/2" x 11"R, 
8-1/2" x 14", 11" x 17" 
• Special paper and 5-1/2" x 

8-1/2" paper cannot be 
used.

• The bypass tray can only be 

used when making 
one-sided copies from 
two-sided originals.

• To use paper in the bypass tray, make a two-sided copy as explained in "TWO-SIDED COPYING USING THE 

BYPASS TRAY" (p.26).

• When performing automatic two-sided copying of a one-sided original, or one-sided copying of a two-sided 

original, the image on the back can be rotated 180 degrees to reverse the top and bottom (Image rotation in 
duplex copying). To rotate the image 180 degrees, enable the setting as explained in "IMAGE ROTATION IN 
DUPLEX COPYING" (p.29) or in the user programs (p.44), and then follow the steps below. In particular, when 
a one-sided "vertical (portrait) original" is placed in a horizontal orientation (8-1/2" x 14" or 11" x 17" size) for 
two-sided copying, the top and bottom of the images on the front and back of the paper will be reversed, and 
thus this function can be conveniently used to make the top and bottom of the images agree.

Orientation of the 
placed original

The top and bottom of 
the images on the front 
and back are reversed.

The top and bottom of the 
images on the front and 
back are the same.