Sharp AR-M205 사용자 설명서

When a misfeed occurs, the misfeed indicator (

) and a misfeed location indicator (

) will blink and the machine 

will automatically stop.
Check the blinking misfeed location indicator to identify the location of the misfeed and remove it.

Check sections A, B, and 
C in the left shows the 
illustration (see the next 
page), and remove the 
misfed original.

Open the feeding roller cover and remove the 
misfed original from the document feeder tray. 
Close the feeding roller cover. 

Open the SPF/RSPF and rotate the two release 
rollers in the direction of the arrow to feed the 
original out. Close the SPF/RSPF and then 
remove the original.

If a small original (5-1/2" x 8-1/2", etc.) is misfed, 
or if an original misfeed occurs in the reversing 
tray of the RSPF (if installed), open the right 
side cover and remove the original. Close the 
right side cover.

The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from the 
machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to the 
surface of the drum will cause dirty copies.

(p.63)

(p.64)

(p.68)

(p.69)

(p.63)

(p.64)

(p.68)

Feeding roller cover

Roller

Right side cover