Sharp MX-M232D 사용자 설명서
95
TROUBLESHOOTING
B. Misfeed in the fusing area
1
Push gently on both ends of the front
cover and open it.
cover and open it.
2
Turn the roller rotating knob in the
direction of the arrow.
direction of the arrow.
3
Carefully remove the misfed paper.
Lower the fusing unit release levers to
allow easier removal.
Lower the fusing unit release levers to
allow easier removal.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
4
Lift the fusing unit release levers, to
return them to their operating
positions.
return them to their operating
positions.
5
Close the front cover and side cover.
The message "
Clear
paper path." will be
cleared and copying will
be possible.
cleared and copying will
be possible.
The fusing unit is hot. Do not touch
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
the fusing unit when removing misfed
paper. Doing so may cause a burn or
injury.
• Do not touch the photoconductive drum
(green portion) when removing the misfed
paper. Doing so may damage the drum and
cause smudges on copies.
paper. Doing so may damage the drum and
cause smudges on copies.
• Be careful about unfixed toner on the
misfed paper not to soil your hands or
clothes.
clothes.
Roller rotating knob
Fusing unit
release lever
release lever
Warning
Caution
• When closing the front cover, gently hold
both ends.
• When closing the side cover, press on the
handle.
• If the message does not clear, check again
to make sure that no pieces of paper
remain.
remain.
Note