Panasonic DA-NE200 사용자 설명서
PROGRAMMING YOUR MACHINE
P
R
O
G
RAM
MING
Y
O
UR MACHI
NE
29
017
RECEIVE MODE
1
Manual
Setting the reception mode to automatic or manual.
2
Auto
022
SUBSTITUTE RCV
1
Invalid
Selecting whether the machine receives to memory when the
recording paper runs out, toner runs out or the recording paper is
jammed.
recording paper runs out, toner runs out or the recording paper is
jammed.
2
Valid
024
PRINT REDUCTION
1
Fixed
Selecting the print reduction mode.
Fixed: Reduce received document according to setting of
Fixed: Reduce received document according to setting of
Parameter No. 25.
Auto:
Reduce received document according to the length of
received originals.
received originals.
2
Auto
025
REDUCTION RATIO
70
70%
Selecting the fixed print reduction ratio from 70% to 100%. This
parameter functions only when the fixed print reduction is selected
on Fax Parameter No. 24.
parameter functions only when the fixed print reduction is selected
on Fax Parameter No. 24.
----
----
100
100%
026
POLLING PASSWORD
(----)
Setting a 4-digit password for secured polling. (See page 73)
027
POLLED FILE SAVE
1
Invalid
Selecting whether the machine retains the polled document(s) in
memory even after the document(s) is polled once.
memory even after the document(s) is polled once.
2
Valid
028
STAMP AT MEM. XMT
1
Invalid
Selecting whether the machine stamps the originals when storing
into memory.
(depending on the Stamp setting on the Control Panel)
into memory.
(depending on the Stamp setting on the Control Panel)
2
Valid
031
INCOMPLETE FILE
SAVE
1
Invalid
Selecting whether the machine retains the document in memory if
it is not successfully transmitted.
it is not successfully transmitted.
2
Valid
033
XMT REDUCTION
1
Invalid
Selecting whether the machine performs reduction when the
transmitting original is wider than the recording paper used at the
receiving machine.
transmitting original is wider than the recording paper used at the
receiving machine.
2
Valid
037
RCV TO MEMORY
(----)
Enter a 4-digit password for printing the received document(s) in
memory by using F8-5 (RCV TO MEMORY).
When F8-5 (RCV TO MEMORY) is set to ON, this parameter is not
selectable on the LCD display. (See page 93)
memory by using F8-5 (RCV TO MEMORY).
When F8-5 (RCV TO MEMORY) is set to ON, this parameter is not
selectable on the LCD display. (See page 93)
042
CONF. POLLED FILE
SAVE
1
Invalid
Selecting whether the machine saves the confidential polled file
even after the file is polled once.
even after the file is polled once.
2
Valid
043
PASSWORD-XMT
1
Off
Setting a 4-digit XMT-Password and selecting whether the
machine performs and checks the XMT-Password of the receiving
station when transmitting. (See page 111)
machine performs and checks the XMT-Password of the receiving
station when transmitting. (See page 111)
2
On
044
PASSWORD-RCV
1
Off
Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 112)
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 112)
2
On
046
SELECT RCV
1
Invalid
Selecting whether the machine performs selective reception.
(See page 109)
(See page 109)
2
Valid
048
TELEPHONE LINE
1
PSTN
Selecting the type of line connected.
2
PBX
049
PSTN ACCESS
CODE
(----)
Setting PSTN Access Code. (max. 4 digits)
Continued on the next page...
No.
Parameter
Setting
Number
Setting
Comments
Customizing Your Machine