Panasonic UF-6100 사용자 설명서

38

34

ENERGY SAVER 

MODE

1

Off

To reduce the power consumption in standby, select either 
Energy-Saver or Sleep mode and specify the Delay Time 
(1 to 120 minutes) for the machine to enter into the 
selected mode. 
The Delay Timer setting is only available in the Energy-
Saver or Sleep Modes.
Off

: The unit will remain in standby 

mode and consume more energy 
than when in Energy-Saver or 
Sleep modes.

Energy-Saver Mode : Saves energy by consuming less 

power than when in standby mode 
by turning off the fuser unit after 
the specified time.

: This is the lowest power state that 

the machine enters after the 
specified time without actually 
turning off.

2

Energy-

Saver

3

Sleep

35

DAYLIGHT TIME

1

Invalid

Selecting whether the clock adjusts for Daylight Saving 
Time automatically. The built-in clock will advance 1 hour 
at 1:00 am on the last Sunday in March and go back 1 
hour at 1:00 am on the last Sunday in October.

2

Valid

37

RCV TO MEMORY

(----)

Enter a 4-digit password used to print out the received 
document in memory by using F8-5 (RCV TO MEMORY). 
When F8-5 is set to On, this parameter will not be shown 
on the LCD display.  (See page 93)

38

ACCESS CODE

(----)

Enter a 4-digit Access Code to secure the machine from 
unauthorized use.  (See page 91)

39

PIN CODE ACCESS

1

None

Selecting the access method (Prefix or Suffix) to dial a 
number with PIN Code.  (See page 98)

2

Suffix

3

Prefix

42

CONF. FILE SAVE

1

Invalid

Selecting whether the machine saves the confidential 
polled file even after the file is polled once.

2

Valid

43

PASSWORD-XMT

1

Off

Setting a 4-digit XMT-Password and selecting whether the 
machine performs and checks the XMT-Password of the 
receiving station when transmitting.  (See page 103) 

2

On

44

PASSWORD-RCV

1

Off

Setting a 4-digit RCV-Password and selecting whether the 
machine performs and checks the RCV-Password of the 
transmitting station when receiving. (See page 104) 

2

On

46

SELECT RCV

1

Invalid

Selecting whether the machine performs selective 
reception. (See page 101) 

2

Valid

47

REMOTE RCV

1

Invalid

Selecting whether or not the machine accepts remote 
reception command.  (See page 63)

2

Valid

48

TELEPHONE LINE

1

PSTN

Selecting the type of line connected.

2

PBX

49

PSTN ACCESS CODE

(----)

Setting PSTN Access Code. (max. 4 digits)