OKI ii 사용자 설명서
Internet Fax
11
•
SNMP - See the manual for the network card.
•
Internet Fax - The settings explained above can be entered here in
addition to the following items, which are accessible only through the
web:
addition to the following items, which are accessible only through the
web:
(a)
SMTP Transmit: Whether or not to enable SMTP transmission
protocol. For normal operations, this setting should be left at
ENABLE.
protocol. For normal operations, this setting should be left at
ENABLE.
(b)
SMTP Receive: Whether or not to enable SMTP reception pro-
tocol. This should normally be set at ENABLE. If you do not
wish to receive by SMTP, change this setting to DISABLE.
tocol. This should normally be set at ENABLE. If you do not
wish to receive by SMTP, change this setting to DISABLE.
Note:
SMTP reception is used to forward incoming mail by FAX.
(c)
POP3: Whether or not to enable POP reception protocol. For
normal operations, this setting should be left at ENABLE.
normal operations, this setting should be left at ENABLE.
(d)
SMTP port number: SMTP protocol port number. The default
setting is 25. Do not change it unless necessary.
setting is 25. Do not change it unless necessary.
(e)
POP port number: POP protocol port number. The default set-
ting is 110. Do not change it unless necessary.
ting is 110. Do not change it unless necessary.
(f)
Use APOP: Available when using a POP server that supports
APOP. With APOP, the POP password will be encrypted
before it is sent. If this setting is turned on when using a server,
which does not support APOP, it will cause a communication
error.
APOP. With APOP, the POP password will be encrypted
before it is sent. If this setting is turned on when using a server,
which does not support APOP, it will cause a communication
error.
•
Printer Menu (Paper and Trays, Timers and Alarms, Emulations) -
This menu will not be displayed for this fax machine. Even if the
printer menu is displayed, the settings cannot be changed.
This menu will not be displayed for this fax machine. Even if the
printer menu is displayed, the settings cannot be changed.
Note:
If any changes are implemented using a web browser, then the
user is requested to enter their username and password . The
default username is ROOT and the default pass word is the last
six digits of the MAC address for the network card. These set-
tings can be modified using Admin Manager.
user is requested to enter their username and password . The
default username is ROOT and the default pass word is the last
six digits of the MAC address for the network card. These set-
tings can be modified using Admin Manager.
Admin manager
Using Admin Manager, the network card can be configured through
Windows95/98/NT4.0 via the network. The settings available through
Admin Manager are mostly the same as those accessible through the web.
Also refer to the network card manual, which contains detailed informa-
Windows95/98/NT4.0 via the network. The settings available through
Admin Manager are mostly the same as those accessible through the web.
Also refer to the network card manual, which contains detailed informa-