Xerox 7428 사용자 설명서
CentreWare Internet Services
WorkCentre 7425/7428/7435
System Administrator Guide
37
Configure Port 9100 (Raw Printing)
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Connectivity folder, then the Protocols folder.
5. Select Port 9100.
6. The available selections include:
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Connectivity folder, then the Protocols folder.
5. Select Port 9100.
6. The available selections include:
•
TCP Port Number: The default is 9100. This does not need to be changed.
•
TBCP Filter: Displayed when PostScript is enabled.
•
Connection Time-Out
7. Enter a Time Out value for jobs being sent to the printer through this port. This is the length of time
that the Controller will wait for an end of job command before printing the current job.
8. Click Apply to accept changes, or Undo to return settings to their previous values.
Note:
Setting changes are not applied until you restart the printer.
Note:
If Port 9100 is not displayed in the Properties Tab directory tree, click Port Status in the directory
tree. Use your mouse to place a check mark in the check box on the Port 9100 line. Click the Apply
button, then click the Reboot Machine button (always available on the Status Tab) to remotely reboot
the printer.
button, then click the Reboot Machine button (always available on the Status Tab) to remotely reboot
the printer.
IP Filtering (IP Address Restriction)
Using CentreWare Internet Services, access to the printer's Services can be restricted by Host IP
Address.
Address.
To restrict device access, perform the following steps:
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
1. Open your Web browser and enter the IP address of the printer in the address field. Press Enter to
open CentreWare Internet Services.
2. Click the Properties tab.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Security folder.
5. Select IP Filtering.
6. Choose which IP Filtering to apply depending upon the address space used with your network.
3. Enter the system administrator User Name and Password (default admin, 1111) if prompted.
4. Click the Security folder.
5. Select IP Filtering.
6. Choose which IP Filtering to apply depending upon the address space used with your network.
Note that IPv4 is the traditional (xxx.xxx.xxx.xxx) address space used with TCP/IP networks.
•
•
IP Filter Enablement: If enabled with a check mark, access to the printer's services will be
restricted to the list of IP Addresses and Subnet Masks specified by clicking the Edit button. If
disabled (unchecked), host access to the printer is universal (unrestricted).
restricted to the list of IP Addresses and Subnet Masks specified by clicking the Edit button. If
disabled (unchecked), host access to the printer is universal (unrestricted).
•
Add or Edit: When this button is clicked, a list of ten lines of IP Address and Subnet Mask entry
boxes is displayed. Sometimes referred to as a restriction list, this list is used to supply the IP
Addresses and Subnet Masks of up to ten hosts (individual computers) that are authorized to
access the printer's services. All other hosts, not specified in this list, will be prevented from
accessing the printer's services.
boxes is displayed. Sometimes referred to as a restriction list, this list is used to supply the IP
Addresses and Subnet Masks of up to ten hosts (individual computers) that are authorized to
access the printer's services. All other hosts, not specified in this list, will be prevented from
accessing the printer's services.