Xerox 7655 사용자 설명서
13
To Change the Ethernet Speed, if needed
1.
Go to a networked workstation, open a Web browser application, enter the TCP/IP address of the
machine in the Address bar, and press Enter.
machine in the Address bar, and press Enter.
2.
Select the [Properties] tab.
3.
Enter the Administrator User name and password if prompted. The default is [admin] and [1111]
4.
Select [Connectivity].
5.
Select [Physical Connections].
6.
Select [Ethernet].
7.
Select your [Rated Speed].
8.
Click [Apply].
9.
When you see the window that says that the properties have been successfully modified, select the
[Status] tab, and click [Reboot Machine].
[Status] tab, and click [Reboot Machine].
10. When the machine has re-booted, verify the Ethernet speed setting displayed under Ethernet Profile
on the machine's Configuration Report, which is set to print, by default, whenever the device is
powered on.
powered on.
11. To print a Configuration Report on demand, go to the machine and press the [Machine Status] button.
Next, touch [Print Reports], then touch [Configuration Report], then touch [Print Selected Report], and
finally touch [Close].
finally touch [Close].