Zebra Technologies 11380100000 사용자 설명서
133
Troubleshooting
LCD Error Messages
4/30/13
Xi4™/RXi4™ User Guide
P1009874-003
LCD Error Messages
for LCD errors, the possible
causes, and the recommended solutions.
Table 11 • LCD Error Messages
LCD Display/
Printer Condition
Printer Condition
Possible Cause
Recommended Solution
The ERROR light flashes.
The printhead was replaced with
one that is not a genuine Zebra™
printhead.
one that is not a genuine Zebra™
printhead.
Install a genuine Zebra™ printhead.
The printer stops; the
RIBBON light is on; the
ERROR light flashes.
RIBBON light is on; the
ERROR light flashes.
In thermal transfer mode, ribbon is
not loaded or incorrectly loaded.
not loaded or incorrectly loaded.
Load ribbon correctly. See
.
In thermal transfer mode, the
ribbon sensor is not detecting
ribbon.
ribbon sensor is not detecting
ribbon.
1.
Load ribbon correctly. See
.
2.
Calibrate the sensors. See
.
In thermal transfer mode, media is
blocking the ribbon sensor.
blocking the ribbon sensor.
1.
Load media correctly. See
.
2.
Calibrate the sensors. See
.
In thermal transfer mode, the
printer did not detect the ribbon
even though it is loaded correctly.
printer did not detect the ribbon
even though it is loaded correctly.
1.
Print a sensor profile.See
. The
ribbon out threshold (
1
) is likely
too high, above the black area that
indicates where the ribbon is
detected (
indicates where the ribbon is
detected (
2
).
2.
Calibrate the sensors or load
printer defaults. See
printer defaults. See
or
1
2
2