Toshiba e-STUDIO230/280 사용자 설명서
269
12
2
Open the upper cover of the finisher.
3
Remove any misfed paper in the finisher.
4
Close the upper cover.
10. Paper Misfeed in the Hole Punch Unit
1
Pressing the release lever of the finisher,
move the finisher carefully away from the
copier.
move the finisher carefully away from the
copier.
2
Rotate the green knob of the hole punch
unit to locate the arrow within the shadow
area in the right side of the knob.
unit to locate the arrow within the shadow
area in the right side of the knob.
- Under this condition, the punches are up.
3
Remove any misfed paper.
4
Return the finisher to the original
position.
position.