Motorola Symbol LS2208 사용자 설명서

2 - 2

Symbol LS2208 Product Reference Guide

The scanner communicates by emitting different beeper sequences and patterns. 

 defines beep 

sequences that occur during both normal scanning and while programming the scanner.

Low/medium/high beep

Power up.

Short high beep

A bar code symbol was decoded (if decode beeper is 
enabled).

4 long low beeps

A transmission error was detected in a scanned 
symbol. The data is ignored. This occurs if a unit is 
not properly configured. Check option setting.

5 low beeps

Conversion or format error.

Lo/hi/lo beep

ADF transmit error.

Hi/hi/hi/lo beep

RS-232 receive error.

Short high beep

Correct entry scanned or correct menu sequence 
performed.

Lo/hi beep

Input error, incorrect bar code or “Cancel” scanned, 
wrong entry, incorrect bar code programming 
sequence; remain in program mode.

Hi/lo beep

Keyboard parameter selected. Enter value using bar 
code keypad.

Hi/lo/hi/lo beep

Successful program exit with change in the 
parameter setting.

Low/hi/low/hi beep

Out of host parameter storage space. Scan Set 
Default Parameter on page 4-3.

Hi/lo beep

New Code 39 data was entered into the buffer.

3 Beeps - long high beep

Code 39 buffer is full.

Lo/hi/lo beep

The Code 39 buffer was erased or there was an 
attempt to clear or transmit an empty buffer.

Lo/hi beep

A successful transmission of buffered data.