Canon L75 사용자 설명서

❏ Is the operation panel blank?

You might have a power problem. Check that the  power cord is plugged 
securely into the printer, and that your electrical source is OK. You 
should have the printer connected directly to its own AC outlet and not 
connected to a power strip to which your computer is connected. 

❏ Is the printer set to the correct port?

Make sure that the printer is configured for the correct port in the Printer 
Properties dialog box. Check both ends of the printer cable to be sure that 
it is securely fastened.

❏ For Windows 2000/XP: Are you not able to complete the installation 

During the installation, you may be unable to continue beyond the dialog 
box prompting you to connect your printer cable to your port. (If you 
cannot continue, the system is unable to display the found new hardware 
wizard, described in Step 7 in the “Installing the Software” section in 
Chapter 2.)

In this situation, you need to exit the setup, remove the device from the 
Windows Device Manager, and restart the installation process.

To resolve this situation:
1.

Click No in the dialog box prompting you to connect your cable, and 

exit the setup.

2.

Remove the device from the Windows Device Manager. The device 

may appear listed as Canon FAXPHONE L75 or Unknown Device.

MP330.book  Page 2  Tuesday, October 22, 2002  3:21 PM