Canon 6065 사용자 설명서

List of Error Messages

Troubleshooting

If a job or operation does not complete successfully, check the error code, and perform the necessary operations according to 
the error code displayed. You can check the error code on the Details screen when you press [Log] on the Status Monitor/Cancel 
screen. (See e-Manual > Status Monitor/Cancel.)
If a send, receive, or fax job does not complete successfully, the error code is printed in the Results column on the Activity Report 
and Send Report. However, if a send job is canceled, “STOP” is printed in the Results column on the Send Report. (See Getting 
Started.)
Perform the necessary procedures according to the error code.

# 001

Cause 1 

Different sized originals were scanned without setting the Different Size Originals mode.

Remedy 

Set the Different Size Originals mode, and then try scanning again.

Cause 2 

Different sized originals were scanned in the 2-Sided Original without setting the Different Size Originals mode.

Remedy 

Set the Different Size Originals mode, and then try scanning again.

# 009

Cause 1 

There is no paper.

Remedy 

Load paper. (See “Loading Paper,” on p. 1-3.)

Cause 2 

The paper drawer is not inserted correctly into the machine.

Remedy 

Insert the paper drawer properly. (See “Loading Paper,” on p. 1-3.)

# 037

Cause 1 

Documents could not be received because there was insufficient memory available.

Remedy 

Erase unnecessary documents and documents with errors from memory to increase the amount of available memory. (See e-

Manual > Fax/I-Fax Inbox and Access Stored Files.)

# 099

Cause1 

The current job was interrupted.

Remedy 

Try processing the job again.

Cause2 

An error occurred because the main power switch was turned OFF while a job was being processed.

Remedy 

Check to see if the main power switch is turned ON. Try processing the job again, if necessary. (See e-Manulal > Before You Start 

Using This Machine.)

# 401

Cause 

The memory media, server, or Advanced Box became full, or the maximum number of files that can be saved in the root directory 

(the top folder inside the memory media) was reached.

Remedy 

Delete unnecessary files in the memory media, server, or Advanced Box, or create a new folder and move existing files to that 

folder to organize the files in the root directory.