Canon 5120B001AA 사용자 설명서
6-2
U
sing
the
Fax
the
Fax
Func
tions
tions
Basic Procedures for Sending Faxes
This section describes the basic procedure for sending a fax.
1
Place your documents.
2
Press [
].
4
Specify the destination.
Entering the fax number
Address book
Coded dial codes
Address book
Coded dial codes
Group dialing
Sequential broadcast
Sequential broadcast
5
Press [
] (B & W).
When your fax is placed in the feeder
The scan starts. Your fax is sent to the destination when the scan is
complete.
When your fax is placed on the platen glass
Perform the following procedure.
(1) Select the size of the original document using [
The scan starts. Your fax is sent to the destination when the scan is
complete.
When your fax is placed on the platen glass
Perform the following procedure.
(1) Select the size of the original document using [
] or [
] and
press [OK].
Scan Size
LTR
STMT
(2) Place the next page on the platen glass and press [
] (B & W).
Press [
] (B & W) for each page.
(3) When all documents are scanned completely, select <Start
Sending> using [
] or [
] and press [OK].
Your fax is sent to your fax destination.
3
Specify the scanning settings as needed.
Resolution Settings
Density Settings
2-Sided Original (MF8380Cdw Only)
Sharpness Settings
Density Settings
2-Sided Original (MF8380Cdw Only)
Sharpness Settings
The settings specified here are effective only for the
current sending operation. To make the settings
effective for all the fax operations, see “Changing the
Default Fax Settings” (
current sending operation. To make the settings
effective for all the fax operations, see “Changing the
Default Fax Settings” (