Canon MP190 사용자 설명서

Troubleshooting

„

„

„

„

The machine is not ready.

Confirm that the Power lamp is lit green.
If the Power lamp is off, turn the machine on.
While the Power lamp is flashing green, the machine is initializing. Wait until the 
Power lamp stops flashing and remains lit green.
If the Alarm lamp is lit orange, an error may have occurred on the machine. For 
details on how to resolve the error, see “An Error Code Is Displayed on the LED” 
on page 44.

Machine is not connected properly.

Make sure that the USB cable is securely plugged into the machine and the 
computer.
z

If you are using a relay device such as a USB hub, disconnect it, connect the 
machine directly to the computer, and try printing again. If printing starts 
normally, there is a problem with the relay device.
Consult the reseller of the relay device for details.

z

There could also be a problem with the USB cable. Replace the USB cable 
and try printing again.

Your machine is not selected in Printer 
on the Print dialog box.

Select your machine’s name in Printer on the Print dialog box.
If your machine’s name does not appear in Printer, follow the procedure below 
to check that the driver for your machine is installed to your computer.
(1)Select Print & Fax Preferences in Printer.

In Mac OS X v.10.3.9, select Edit Printer List in Printer.

(2)Check that your machine’s name is displayed in the list of printers and that 

the check box is selected.

(3)If your machine’s name is not displayed, click Add(+) to add the machine.

If you cannot add the machine, follow the procedure described in your setup 
sheet to reinstall the MP Drivers.

The ink absorber is almost full.

See “E, 8” (Ink absorber is almost full.) in “An Error Code Is Displayed on the 
LED” on page 44.

Ink has run out.

See “E, 1, 6” (Ink has run out.) in “An Error Code Is Displayed on the LED” on 
page 44.

Ink level cannot be detected.

See “E, 1, 3” (Ink level cannot be detected.) in “An Error Code Is Displayed on 
the LED” on page 44.