Canon 5065 사용자 설명서

Specifying Common Settings

C

u

sto

m

iz

ing Settings

 

You can set the amount of energy that the machine consumes when it is in the 
Sleep mode.

NOTE

 

•

The machine may not enter the Sleep mode completely, depending on the status and 
type of installed MEAP applications (e.g., there still may be applications running in the 
background consuming power).

•

If there are less than 10 minutes remaining before a Delayed Send job is to be sent, the 
machine will not enter the Sleep mode completely.

•

If you are using a management application to view or manage the settings and status of 
the machine via the network, the machine may not enter the Sleep mode completely.

•

If you are using the machine as a Windows printer, the machine may not enter the Sleep 
mode completely if SNMP Status is enabled for your operating system (unless your 
computer is turned OFF). For more information on disabling SNMP Status, contact your 
network administrator.

•

In some cases, the energy consumption level in the Sleep mode is 'High' even when the 
energy consumption level is set to 'Low' when:

- A job is being processed (including a forwarding job, report job, receive job, and 

sending a forwarding done notice).

- The optional imagePASS is installed.

- Any of the following settings are set from the Additional Functions screen:

*1 If there is more than 10 minutes remaining before the specified time, the machine consumes the same amount 

of energy as when the energy consumption level is set to 'Low'.

Settings

Send

The Daily Activity Report Time setting for 
the Activity Report is set to 'On'.

*1

Fax

The Daily Activity Report Time setting for 
the FAX Activity Report is set to 'On'.

*1

Communications 
Settings

Memory RX Inbox 
Settings

Time limit for receiving fax documents in 
memory is set.

*1

Network Settings

TCP/IP Settings

Use IPv6 is set to 'On'.
DHCP is set to 'On'.

NetWare Settings

NetWare is set to 'On'.

AppleTalk Settings

AppleTalk is set to 'On'.

SMB Server Settings

SMB is set to 'On'.

E-Mail/I-Fax

The POP Interval setting is set to fewer 
than '10' minutes. (Excluding when the 
POP Interval is set to '0'.)