Canon 5065 사용자 설명서
Entering Characters from the Touch Panel Display
2-25
2
Basic Oper
ations
NOTE
•
If you make a mistake when entering characters, press [ ] or [ ] to position the
cursor
cursor
➞ press [Backspace] to delete the characters ➞ enter the correct
characters.
•
To delete all of the characters you have entered, press
(Clear).
2
When you have entered all characters, press [OK].
Values in Inches
If you want to enter values in inches in all modes which require a numeric entry, set
Inch Entry to 'On' in Common Settings (from the Additional Functions screen). (See
"Inch Entry," on p. 4-31.) This enables you to enter values in inches when you press
[Inch] on a screen requiring a numeric entry or measurement.
Inch Entry to 'On' in Common Settings (from the Additional Functions screen). (See
"Inch Entry," on p. 4-31.) This enables you to enter values in inches when you press
[Inch] on a screen requiring a numeric entry or measurement.
The following example shows you how to enter 1 1/2" for Original Size in the Zoom
Program mode.
Program mode.
1
Press [1]
➞ [_] ➞ [1] ➞ [/] ➞ [2] using the numeric keys on the
touch panel display.
NOTE
•
If you make a mistake when entering values, press [C] on the touch panel display
➞ enter the correct values.
➞ enter the correct values.
•
You can enter only 2, 4, 8, or 16 as the denominator.
•
The value entered in inches is converted to millimeters by the machine each time it
is entered. Thus, there may be a slight difference between the value calculated and
the actual value entered.
is entered. Thus, there may be a slight difference between the value calculated and
the actual value entered.
•
To enter values in millimeters, press [mm].