Canon MP-C545 사용자 설명서

Set this mode if you want your MultiPASS to automatically switch between voice 
and fax calls. For this mode, you need to have a telephone connected to your unit.

You can select these options using the MultiPASS Fax Setup Utility or the operation 
panel. If you are using the MultiPASS Fax Setup Utility, see the online MultiPASS 
Desktop Manager Software Guide. If you are using the operation panel, see the 
online Standalone Fax Manual.

Sending document 

manually

Sending document 

automatically

The MultiPASS answers without ringing.

The MultiPASS listens for the fax tone.

(For 8 sec.)

The fax tone 

is detected.   

The fax tone is not detected.

The document is 

received automatically.

The MultiPASS starts ringing.

Pick up the 

handset to talk.

If you don’t pick up the handset

(within 15 sec.).

Choose between:

RECEIVE

 (factory default setting) and 

DISCONNECT

.

(Factory default setting)

(The fax tone is 
detected and the 
MultiPASS switches 
to receive  mode.)

The MultiPASS 
disconnects the call.

Not all fax machines are capable of sending a fax 
tone. For those cases if you set the 

DEFAULT 

ACTION

 to 

RECEIVE

, the MultiPASS switches to 

receive mode automatically and starts receiving 
the document. If no document comes in, it 
disconnects after approximately 55 seconds.

(Factory default 
setting =15 sec.)

(Factory default 

setting = 8 sec.)

Telephone charges 
begin for the caller.