Canon MP-C545 사용자 설명서

다운로드
페이지 222
Chapter 7
Troubleshooting
7-29
T
roub
leshooting
The sending fax machine may not be functioning properly.
The sending fax machine usually determines the fax’s quality. Call the sender 
and have them make sure the top cover and scanning glass on their fax 
machine are clean.
Error Correction Mode (ECM) may be disabled.
Make sure ECM is on. (If you are using the Fax Setup Utility, see the 
MultiPASS Desktop Manager Software Guide. If you are using the operation 
panel, see the Standalone Fax Manual.)
Faxes do not print.
The orange tape may not be removed from the BJ cartridge.
Be sure to remove the orange tape from the BJ cartridge before you install it  
see page 6-19).
The BJ cartridge or a BJ tank may not be installed properly.
Make sure the BJ cartridge and the BJ tank(s) are installed properly (see 
page 6-22).
The BJ cartridge print head may need cleaning.
Clean the BJ cartridge print head (see page 6-14).
The BJ cartridge or the BJ tank(s) may need to be replaced.
Fax images print blotched or uneven.
The telephone lines may be in poor condition, or you may have a bad 
connection.
Error Correction Mode (ECM) sending/receiving should eliminate such 
problems. However, if the telephone lines are in poor condition, you may have 
to try again.
The sending fax machine may not be functioning properly.
The sending fax machine usually determines the fax’s quality. Call the sender 
and have them make sure the top cover and scanning glass on their fax 
machine are clean.