Canon 2237B008 사용자 설명서

다운로드
페이지 388
2‑7
Original and Paper
On the Platen Glass
The machine automatically detects the size of the following originals: 11" x 17", LGL, LTR, and LTRR.
1
 
Lift the feeder.
This machine is equipped with an open/close 
sensor (A) on the feeder (see circled area 
in the above illustration). When placing 
originals on the platen glass, lift the feeder 
high enough so that the sensor does not 
touch the feeder. If the sensor continues to 
touch the feeder, the size of the originals may 
not be detected correctly.
2
 
Place your original face down.
The surface of the original that you want to 
scan must be placed face down.
Align the top edge of your original with the 
back edge of the platen glass (by the arrow in 
the top left corner).
Place books and other bound originals on the 
platen glass in the same way.
When you are enlarging an LTR or STMT 
original onto 11" x 17" or LGL paper, place the 
original horizontally on the platen glass, and 
align it with the LTRR or STMTR marks.
3
 
Gently close the feeder.
Close the feeder gently to avoid catching 
your hands, as this may result in personal 
injury.
Do not press down hard on the feeder 
when using the platen glass to make copies 
of thick books. Doing so may damage the 
platen glass and result in personal injury.