Canon 730i 사용자 설명서

Chapter 12

Troubleshooting

Troubleshooting

AUTO REDIAL

The machine is waiting to redial 
the other party’s number 
because the line was busy or the 
recipient did not answer when 
you tried to send a document.

Wait for the machine to automatically 
redial the number. If you want to 
cancel automatic redialing, wait until 
the machine starts dialing the 
number, press [Stop/Reset], then 
follow the instructions in the LCD.

Bk INK EMPTY

The black ink tank in the 
printhead is empty.

Replace the ink tank.

BUSY/NO 

SIGNAL (#018)

The telephone number you 
dialed is busy.

Try sending the document at a later 
time.

The fax number dialed was 
incorrect.

Check the fax number and dial again.

The other party’s fax machine is 
not working.

Contact the other party and have 
them check their fax machine.

The other party is not using a G3 
machine.

Contact the other party and ask them 
to send or receive the document 
using a G3 machine.

The touch tone/rotary pulse 
setting on your machine is 
incorrect.

Set your machine to the setting that 
matches your telephone line. 

The receiving fax machine did 
not answer within 55 seconds 
(after all automatic redialing 
attempts).

Contact the other party and have 
them check their fax machine. You 
can try to send the document using 
manual sending. For an overseas call, 
add pauses to the registered number. 

C INK EMPTY

The cyan ink tank in the 
printhead is empty.

Replace the ink tank. 

CANNOT USE THIS CARD 
TURN OFF AND ON

You have inserted a Microdrive 
memory card or a damaged card 
into the card slot.

Remove the memory card from the 
slot, then turn the power off and on 
again.
You cannot use Microdrive memory 
cards with this machine.

CARD READER BUSY

You tried to start photo printing 
when the memory card slot was 
in use by the computer.

Wait until the memory card slot is no 
longer being used by the computer.

CARTRIDGE JAMMED

The printhead holder cannot 
move. This is normally due to a 
paper jam.

Clear the paper jam or whatever is 
obstructing the printhead holder and 
then press [Resume]. Do not attempt 
to move the printhead holder 
manually.

CHANGE 

PAPERSIZE:FAX

The print media size setting is set 
to a size other than <LTR>, 
<LGL>, or <A4>.

Set the print media size setting to 
<LTR>, <LGL>, or <A4> and load 
paper of the same size. The received 
fax will then be printed automatically.