Metra Electronics 99-7407 전단

Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adaptor and making
connections as shown. (Isolate and
individually tape off the ends of any
unused wires to prevent electrical short
circuit).

Re-connect the battery terminal and test the unit
for proper operation. Mount the head unit/kit
assembly to the sub-dash with (4) screws
previously removed in step #1.

A) Strip wire ends back ½"
B) Twist ends together
C) Solder
D) Tape

99-7407

INSTALLATION
INSTRUCTIONS

APPLICATIONS

CAR

PAGE

NISSAN
240SX 1989-94........................................................... 1
Maxima 1989-94.........................................................1
Stanza 1987-89...........................................................2

KIT COMPONENTS

TOOLS REQUIRED

Cutting tool

Wrench

Phillips screwdriver

Faceplate
#1

Faceplate
#2

Equalizer
Dummy Plate

Fig. B

Fig. A

Radio Housing

KIT FEATURES

Shaft and
DIN unit
provisions

Equalizer
provisions

IF AN EQUALIZER WILL BE INCLUDED: Slide the aftermarket equalizer into the back of the
Radio Housing. Using the hardware included with the equalizer, mount the unit to the kit.
(see Fig. A)

IF AN EQUALIZER WILL NOT BE INCLUDED: Snap the Equalizer Dummy Plate into the
Radio Housing. (see Fig. B)

1-800-221-0932 www.metraonline.com

rev. 100103