Eizo CG221 사용자 설명서

If a problem persists even after applying the suggested remedies, contact an EIZO 
dealer. 

●     

No picture problems : See No.1 ~ No.2

 

●     

Imaging problems : See No.3 ~ No.14

 

●     

Other problems : See No.15 ~ No.18

 

●     

USB problems : See No.19 ~ No.20

 

Problems

Points to check with possible solutions

Status of Indicator lamp "ON" 
is off.

[ ] Check that there is nothing left on the face of 

Power switch. Wipe the control panel, and 
then touch the Power switch again with dry 
finger.
Check that the power cord is correctly 
connected. 
If the problem persists, turn off the monitor 
power for a few minutes, then turn it back on 
and try again.

Status of Indicator lamp "ON" 
is light.

[ ] Check the Gain setting.

Status of Indicator lamp "Power 
Save" is light.

[ ] Switch the signal Input by touching the input 

signal selection switch on the front control 
panel.

[ ]

 

These messages appear when the signal is not 
inputted correctly, even if the monitor 
functions properly.

[ ] When the image is displayed correctly after a 

short time, there is no problem with the 
monitor. (Some PCs do not output the signal 
soon after powering on.)

[ ] Check that the PC is turned ON.
[ ] Check that the signal cable is properly 

connected the PC or graphics board.

[ ] Switch the signal input by touching the Input 

Signal Selection switch on the control panel.