Advantech FPM-2150 사용자 설명서

•  Max Output Power: 42 Watts
•  AC input voltage: 100 - 240 V AC
•  Output voltage: + 12 V @ 3.5 A
•  Safety Standards: UL/CE/CCC/TUV/CB

The following connectors are on the bottom of the FPM-2150 Series:

VGA Port (DB15)
This DB-15 connector can be connected to the system via the external 15-
pin DB-15 connector locatd on the left side of the system unit.

RS-232 Touchscreen Connector (DB9) (with FPM-2150G-R)
This connector will only be present if a touchscreen is installed. It must 
be connected to the RS-232 port of the PC. The touchscreen cable is 
included with all orders that include the touchscreen option.

USB Touchscreen Connector (USB type B) (with FPM-2150G-U)
This connector will only be present if a touchscreen is installed. It must 
be connected to the USB port of the PC. The touchscreen cable is 
included with all orders that include the touchscreen option.

DC 12V Power In
This connector connects to the DC 12V Switching Power Supply.

Warning:
Before you connect a VGA cable between FPM-2150 and a PC, please 
note the following issues.
1.  If you have installed a operating system in the PC, make sure the ver-

tical frequency is within the acceptable range. (Refer to Appendix B)

2.  If you have not installed a operating system, you have to adjust the 

vertical frequency to fall within the range.