JVC GM-V42PCE 사용자 설명서
![JVC](https://files.manualsbrain.com/attachments/5a164373f8011a1a722bf4f4e2a525689656bbe7/common/fit/150/50/49632231f75d09f0c41422c0d8935c786899406d6105204c6d7c8b00c0b3/brand_logo.jpeg)
7
ENGLISH
9 VIDEO A terminals (page 12)
• AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio input terminals of a
VCR, etc.
VCR, etc.
• VIDEO IN terminal (BNC)
Connect this terminal to the video output terminal of a
VCR, etc.
VCR, etc.
• VIDEO OUT terminal (BNC)
Connect this terminal to the video input terminal of
another Monitor.
another Monitor.
Note:
• Since the video output terminals on this Monitor are
• Since the video output terminals on this Monitor are
loop-through terminals, the devices connected to this
video output terminal should be correctly terminated.
Otherwise, pictures become abnormally bright or the
Monitor screen gets affected abnormally.
video output terminal should be correctly terminated.
Otherwise, pictures become abnormally bright or the
Monitor screen gets affected abnormally.
p VIDEO B terminals (page 12)
• AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio output terminals of
a VCR, etc.
a VCR, etc.
• Y/C (S video) IN terminal (mini DIN 4pin)
Connect this terminal to the S-video output terminal of a
VCR, etc.
VCR, etc.
• VIDEO IN terminal (pin jack)
Connect this terminal to the video output terminal of a
VCR, etc.
VCR, etc.
Note:
• When both the video and S-video terminals are
• When both the video and S-video terminals are
connected, the S-video terminal will have priority.
q COMPONENT/RGB B input terminals (page 12)
• AUDIO (L/MONO, R) input terminals (pin jack)
Connect these terminals to the audio output terminals of
the other equipment.
the other equipment.
• G, B, R, HD/Cs, VD (VIDEO) input terminals (BNC)
Connect these terminals to the following output
terminals of a personal computer or other equipment:
– Analog RGB signal output terminals
– Horizontal sync (HD) signal or composite (Cs) signal
terminals of a personal computer or other equipment:
– Analog RGB signal output terminals
– Horizontal sync (HD) signal or composite (Cs) signal
output terminal
– Vertical sync (VD) signal output terminal
Notes:
• External sync signals are automatically detected when
• External sync signals are automatically detected when
they come in.
• When both horizontal (HD)/vertical (VD) sync and
composite (Cs) sync are connected, HD/VD sync signals
will be used.
will be used.
• Y, Pb, Pr (VIDEO) input terminals (BNC)
Connect these terminals to the component signal output
terminals of NTSC or high-vision equipment.
terminals of NTSC or high-vision equipment.
Note:
• When these terminals are used as the component
• When these terminals are used as the component
terminals (Y, Pb, Pr)—see “Setting the COMPONENT/
RGB B Input” on page 22, external sync signals (HD/Cs,
VD) cannot be used.
RGB B Input” on page 22, external sync signals (HD/Cs,
VD) cannot be used.
9
p
q
VIDEO A
VIDEO
IN
OUT
AUDIO
L/MONO
R
VIDEO B
VIDEO
IN
Y/C IN
COMPONENT/RGB B
VIDEO
Y/G Pb/B
Pr/R
HD/Cs VD
AUDIO
L/MONO
R
AUDIO
L/MONO
R
Note:
* GM-V42PCE, GM-V42PCEG and GM-V42PCEB
* GM-V42PCE, GM-V42PCEG and GM-V42PCEB
do not have the following input terminals—
VIDEO A, VIDEO B, and COMPONENT/RGB B.
To input video, S-video, and component signals,
you need to install video input unit (IF-C42P1G),
which is separately purchased.
VIDEO A, VIDEO B, and COMPONENT/RGB B.
To input video, S-video, and component signals,
you need to install video input unit (IF-C42P1G),
which is separately purchased.
04_13_GM_V42[E].p65
03.6.23, 4:42 PM
7