JVC DT-V17L3DY 사용자 설명서

• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed, 

and may be slightly different from actual products.

•  Design and specifications are subject to change without notice.
•  All company names and product names mentioned herein are used for identification purposes only, and 

may be the trademarks or registered trademarks of their respective companies.

7 General

Model name

DT-V17L3DY

Type

Multi format LCD monitor

Screen size

Type 17 wide format

Aspect ratio

16:10

LCD panel

17˝ wide, active matrix TFT

Effective screen size

Width: 367.2 mm (14 7/16˝)
Height: 229.5 mm (9˝)

Number of pixels displayed

1 440 x 900

Number of colors displayed

16.77 million

Viewing angle (TYP.)

160° (Horizontally), 140° (Vertically)

Panel brightness (TYP.)

400 cd/m

2 

Contrast ratio (TYP.)

600:1

Horizontal/vertical frequency 
(computer signal)

H: 31.469 kHz – 75.000 kHz
V: 48 Hz – 65 Hz

*  Some signals within this frequency range may not be displayed (“Out of 

range” is displayed).

Compliant video signal format

☞ “Available signals” on page 9

Format

HD SDI:  BTA S-004B, SMPTE292M
SD SDI:  ITU-R BT.656: 525/625
 SMPTE259M: 

525

EMBEDDED AUDIO: SMPTE299M, SMPTE272M

Audio output

Internal speaker: 1.0 W + 1.0 W

Operating conditions

Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)

Power requirements

AC 120 V, 50 Hz/60 Hz
DC 12 – 17 V

Rated current 

0.56 A (AC 120 V)
3.0 A (DC 12 – 17 V)

External dimensions
(excluding protruding parts)

Width: 

395 mm (15 5/8˝) (with the stand), 395 mm (15 5/8˝) (without the stand)

Height: 

344.8 mm (13 5/8˝) (with the stand), 304 mm (12˝) (without the stand)

Depth: 

199 mm (7 7/8˝) (with the stand), 86 mm (3 1/2˝) (without the stand)

Weight

7 kg (15.5 lbs) (with the stand)
5.3 kg (11.7 lbs) (without the stand)

Accessories

AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder), 
Ferrite core x 1 (for external battery)

7 Input/output terminals

VIDEO

Input/output of composite signal:
 

1 line, BNC connector x 2, 1 V(p-p), 75 Ω

*  The input (IN) and output (OUT) terminals are bridge-connected (auto 

termination).

DVI-D (HDCP)

DVI-D signal input (compatible with HDCP):

  DVI-D connector x 1 (compatible with DDC2B)

COMPO. (Y, P

B

/B-Y, P

R

/R-Y)

Input/output of analog component signal:
 

1 line, BNC connector x 6 

 Y: 

 1 

V(p-p), 

75 

Ω

 

P

B

/B-Y, P

R

/R-Y: 0.7 

V(p-p), 

75 

Ω

*  The input (IN) and output (OUT) terminals are bridge-connected (auto 

termination).

E. AUDIO HD/SD SDI (IN 1)

Digital signal input (compatible with EMBEDDED AUDIO signals):

  auto detection, 1 line, BNC connector x 1

E. AUDIO HD/SD SDI (IN 2)

E. AUDIO HD/SD SDI 
(SWITCHED OUT)

Digital signal output (compatible with EMBEDDED AUDIO signals):

  1 line switched out, BNC connector x 1

AUDIO (IN)

Analog audio signal input: 

1 line, RCA connector x 2,

 

 

 

500 mV (rms), high impedance

AUDIO (MONITOR OUT)

Analog audio signal output: 

1 line, RCA connector x 2,

   500 

mV 

(rms)

REMOTE (MAKE/TRIGGER)

☞ “Using the MAKE/TRIGGER system” on page 17

REMOTE (RS-485)

☞ “Using the serial communication” on page 18

REMOTE (RS-232C)

Use the Anton Bauer Dionic 90 (mount: QR DXC-M3A) external battery.

Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.