Lorex Technology L20WD800 Series 사용자 설명서

Camera Installation

Before you install the camera, carefully plan where and how you will position the camera, and 
where you will route the cable that connects the camera to the System.

• Select a location for the camera that provides a clear view of the area you want to monitor, 

which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.

• Plan the cables’ route so that it is not close to power or telephone lines, transformers, 

microwave ovens or other electrical equipment that could interfere with the system.

• Select a location for the camera that has an ambient temperature between 14

°

F~113

°

F 

(-10

°

C~45

°

C)

• If you plan to install the camera in a location that has conditions not recommended in this 

manual, consult with a professional installer and consider use of a separate camera cover 
or housing

• Before starting permanent installation, have another person hold the camera for you while 

you verify its performance by observing the image on the monitor. 

1. Attach the pedestal to the ceiling, wall or other surface by the base using the provided 

screws.

2. The mounting bracket must be attached to 

a structural device such as a wall stud or 
ceiling rafter using the supplied screws.

3. Attach the camera to the pedestal. Adjust 

the angle of the camera, and tighten the 
thumbscrew to set the position

NOTE: The Camera can be attached to the stand 
using the screw point on the top or the bottom (to 
maintain proper camera alignment). This prevents 
the image from becoming inverted.

* Camera model may not be exactly as shown.