Lenovo L171p 사용자 설명서
Chapter 3.
3-3
The image
quality is
unnacceptable.
quality is
unnacceptable.
The video signal cable
is not connected with
the monitor or system
completely.
is not connected with
the monitor or system
completely.
Be sure the signal cable is
firmly plugged into the
system and monitor.
firmly plugged into the
system and monitor.
The color settings
may be incorrect.
may be incorrect.
Select another color
setting from the OSD
menu.
setting from the OSD
menu.
The automatic image
setup function was
not performed.
setup function was
not performed.
Perform automatic image
setup.
setup.
The power
indictator is not
lit and there is
no image.
indictator is not
lit and there is
no image.
•
The monitor’s
power switch is
not switched on.
power switch is
not switched on.
•
The power cord is
loose or
disconnected.
loose or
disconnected.
•
There is no power
at the outlet.
at the outlet.
•
Be sure the power
cord is connected
properly.
cord is connected
properly.
•
Be sure the outlet has
power.
power.
•
Power on the
monitor.
monitor.
•
Try using another
power cord.
power cord.
•
Try using another
electrical outlet.
electrical outlet.
Screen is blank
and power
indicator is
steady amber or
flashing green
and power
indicator is
steady amber or
flashing green
The monitor is in
Standby/Suspend
mode
Standby/Suspend
mode
•
Press any key on the
keyboard or move
the mouse to restore
operation.
keyboard or move
the mouse to restore
operation.
•
Check the Power
Options settings on
your computer.
Options settings on
your computer.
The power
indicator is
green, but there
is no image.
indicator is
green, but there
is no image.
The video signal cable
is loose or
disconnected from the
system or monitor.
is loose or
disconnected from the
system or monitor.
Be sure the video cable is
connected with the
system properly.
connected with the
system properly.
The monitor
brightness and
contrast are at the
lowest setting.
brightness and
contrast are at the
lowest setting.
Adjust the brightness and
contrast setting on the
OSD menu.
contrast setting on the
OSD menu.
One or more of
the pixels appear
discolored
the pixels appear
discolored
This is a characteristic
of the LCD
technology and is not
an LCD defect.
of the LCD
technology and is not
an LCD defect.
If there are more than five
pixels missing, contact
the IBM Support Center.
pixels missing, contact
the IBM Support Center.
Table 3-2.
Troubleshooting
Problem
Possible cause
Suggested action
Reference