Siemens KVM s2-0411 사용자 설명서
Assigning target device names
Basic operations
18
590-595-609A
3.5.1
Assigning target device names
Use the Names window to identify individual target devices by name rather than by port
number. The Names list is always sorted by port order. Names are stored in the KVM-
IA, so even if you move the cable or target device to another ARI port, the name and
configuration are recognized by the appliance. If a target device is turned off, you will
not be able to modify the name of the applicable KVM-IA.
number. The Names list is always sorted by port order. Names are stored in the KVM-
IA, so even if you move the cable or target device to another ARI port, the name and
configuration are recognized by the appliance. If a target device is turned off, you will
not be able to modify the name of the applicable KVM-IA.
3.5.1.1
Accessing the Names window
Press Print Screen to start the OSCAR interface. The Main window opens.
Click Setup - Names. The Names window opens.
If the target device list changes, the mouse cursor will turn into an hourglass as the list is
automatically updated. No mouse or keyboard input is accepted until the list update is
complete.
automatically updated. No mouse or keyboard input is accepted until the list update is
complete.
3.5.1.2
Assigning names to target devices
In the Names window, select a target device name or port number and click Modify.
The Name Modify window opens.
The Name Modify window opens.
Type a name in the New Name field. Names of target devices can be up to 15
characters long. Valid characters are A through Z, a through z, 0 through 9, space,
and hyphen.
characters long. Valid characters are A through Z, a through z, 0 through 9, space,
and hyphen.
Click OK to transfer the new name to the Names window. The selection is not
saved until you click OK in the Names window.
saved until you click OK in the Names window.
Repeat steps 1 to 3 for each target device in the switching system.
Click OK in the Names window to save the changes, or click X or press Escape to
exit without saving changes.
exit without saving changes.
3.5.2
Assigning device types
The KVM s2-0411 appliance automatically discovers tiered remote console switchs, but
you must specify the number of ports on the tiered appliance through the Devices
window.Fujitsu Siemens AutoView Console Switches and other earlier-model remote
console switchs are listed in the Type category for the tiered appliance. When you select
you must specify the number of ports on the tiered appliance through the Devices
window.Fujitsu Siemens AutoView Console Switches and other earlier-model remote
console switchs are listed in the Type category for the tiered appliance. When you select
Devices
Specify the number of ports that are on the attached tiered appliance.
Names
Assign a unique name to each target device.
Keyboard
Specify the keyboard country code.
Scan
Set up a custom scan pattern for up to 100 target devices.
Switch
Specify the appliance mode.
Network
Specify the network speed and configuration, IP address, netmask, and
gateway for the switching system.
gateway for the switching system.
Option
Purpose
Table 3: Setup features to manage routine tasks for the target devices (Continued)