Sharp PNA601 사용자 설명서

USER
Adjusts each item when the WHITE BALANCE is set to

USER.

R-CONTRAST ....Adjusts bright-toned red component.

G-CONTRAST ....Adjusts bright-toned green component.

B-CONTRAST ....Adjusts bright-toned blue component.

R-OFFSET ..........Adjusts dark-toned red component.

G-OFFSET .........Adjusts dark-toned green component.

B-OFFSET ..........Adjusts dark-toned blue component.
COPY TO USER
Copies the value set for PRESET to the USER setting.

Select “ON” and then press

GAMMA
Selects the gamma. USER sets the gamma to the sent

value (see page 35). (In PIP mode, the main side setting is

reflected in the image.)

When using LOCAL DIMMING, it controls the brightness per

area. So, the gamma may differ from the set value.
LOCAL DIMMING
Automatically controls the backlight brightness per area

according to the image. Increasing the level of this setting

will result in higher contrast of the image, and will lower the

monitor power consumption.

Light leakage and/or a ring-like appearance may be seen

depending on the image. Change the setting in this situation.

(In PIP mode, the main side setting is reflected in the image.)
POWER LIMITED
Can be set when LOCAL DIMMING is HIGH. Set the value

so that it is smaller than the set power consumption (see

page 55.) by adjusting the brightness, etc.
DISPLAY COLOR PATTERN
Displays a color pattern. Can be displayed while the menu

screen is displayed, so you can refer to the pattern while

adjusting the image.

OFF ....................No pattern display.

WHITE ................White single color pattern display.

RED ....................Red single color pattern display.

GREEN ...............Green single color pattern display.

BLUE ..................Blue single color pattern display.

USER.................. Red/green/blue mixed color pattern display.

When USER is selected, set each color’s

level.

RESET
Resets the values of the PICTURE menu items to the factory

preset values.
Select “ON” and then press

AUDIO

TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and

left.
RESET
Resets the values of the AUDIO menu items to the factory

preset values.
Select “ON” and then press

SETUP

OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
SCREEN MOTION
Residual images are reduced by moving the screen.

PATTERN1 ..... The whole screen moves vertically and

horizontally.

PATTERN2 ..... A black screen spreads from the bottom of

the screen and then shrinks to the bottom of

the screen.

If the monitor is installed in the portrait

orientation, a black screen spreads from the

left end of the screen and then shrinks to the

left end of the screen.

PATTERN3 ..... A black bar moves from the left end to the

right end of the screen.

If the monitor is installed in the portrait

orientation, a black bar moves from the top

to the bottom of the screen.

PATTERN4 ..... Black screens appear from both the top and

bottom of the screen, and the displayed

image is compressed into the central field.

If the monitor is installed in the portrait

orientation, the screen is compressed from

the left and right ends.

PATTERN1

PATTERN2

PATTERN4

PATTERN3

MOTION TIME 1
Specify a time period (operating interval) until SCREEN

MOTION starts.
MOTION TIME 2
Specify a time period during which SCREEN MOTION

operates (time period during which the screen will move).
MONITOR
Select the installation direction of the monitor.

LANDSCAPE ............Horizontal orientation

PORTRAIT ...............Vertical orientation

Menu Items