Sharp PNV600 사용자 설명서

4

E

•  This product is for use indoors.

•  A mounting bracket compliant with VESA specifications is

required.

•  Since the monitor is heavy, consult your dealer before

installing, removing or moving the monitor.

•  Mounting the monitor on the wall requires special expertise

and the work must be performed by an authorized SHARP 

dealer. You should never attempt to perform any of this 

work yourself. Our company will bear no responsibility 

for accidents or injuries caused by improper mounting or 

mishandling.

•  Use the monitor perpendicular to a level surface. If

necessary, the monitor may be tilted up to 20 degrees

upward or downward.

•  When mounting the monitor horizontally, the optional fan

cover (PN-ZR31) is required. For details along with the

horizontal mounting conditions, consult your dealer.

•  This monitor should be used at an ambient temperature

between 32°F (0°C) and 104°F (40°C).

•  Be careful of high temperatures in the surrounding area. 

When installing the monitor inside a housing, or if the

ambient temperature may be outside of the range of 32ºF

(0ºC) to 104ºF (40ºC), install a fan or take other measures

to keep the ambient temperature within the required range. 

•  Temperature condition may change when using the monitor

together with the optional equipments recommended by 

SHARP. In such cases, please check the temperature 

condition specified by the optional equipments.

•  Do not block any ventilation openings. If the temperature

inside the monitor rises, this could lead to a malfunction.

•  Do not place the monitor on a device which generates heat.

•  Adhere to the following when installing the monitor in its

portrait orientation. Failing to adhere to the following may 

cause malfunctions. 

- To install in landscape orientation, rotate the monitor 90

degrees to the right.

- Set the MONITOR on the SETUP menu to PORTRAIT.

(See Operation manual.)

- Be sure to secure the power cord (supplied) to the cable

clamp attachment with the supplied cable clamp.  

Make sure that the power cord (supplied) does not supply 

power to the terminal when being secured and do not 

over bend the power cord (supplied).

Cable clamp

Power cord (Supplied)

Cable clamp 

attachment

•  After installing the monitor, affix the protection covers

(4 pieces) as necessary.

Protection cover

Protection cover

If any component should be missing, please contact your dealer.


 Liquid Crystal Display Monitor: 1



 Cable clamp: 2



 Power cord: 1



 CD-ROM (Utility Disk for Windows): 1



 Setup manual (this manual): 1



 Protection cover: 4



 Handle screw (short): 4



 Bezel sheet (long/short): 2 each



 Bezel sheet attachment instructions: 1

*  Sharp Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.

*  For environmental protection!

  Do not dispose of batteries in household waste. Follow the disposal instructions for your area.