Siemens MCM 1902 사용자 설명서
Color monitor MCM 1902
8 - English
A26361-K527-Z100-2-5E19
Connecting the monitor
See your PC's operating manual for details of the ports on the system unit.
!
Please note the information provided in the "
" section in the chapter "
Important
notes
" at the beginning of this manual.
Do not cover the ventilation openings of the monitor.
If you are assembling monitors beside each other, there must be a minimum distance of
30 cm between monitors of the same constructional type, to avoid image distortion. With
different monitors, the distance must be increased, if necessary.
30 cm between monitors of the same constructional type, to avoid image distortion. With
different monitors, the distance must be increased, if necessary.
1
2
1 = Power connector
2 = D-SUB connector (15-pin)
Ê
Be sure that the monitor and the system unit are switched off.
!
The system unit's power plug must be pulled out!
The data cable supplied has two 15-pin D-SUB connectors for connection to the monitor and to the
system unit.
system unit.
!
CE conformance and optimum picture quality are guaranteed only if you use the data
cable supplied.
cable supplied.
Ê
Connect one of the connectors of the data cable to the D-SUB connector on the monitor (2)
and secure the connector by tightening the safety screws.
and secure the connector by tightening the safety screws.
Ê
Connect the other connector of the data cable to the active monitor port on the system unit and
secure the connector by tightening the safety screws.
secure the connector by tightening the safety screws.
i
If your system unit has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
graphics card), the monitor port for the separate graphics card is usually active.